Square Polycarbonate Walk-In Greenhouse with Two Roof Vents - Grey

Square Polycarbonate Walk-In Greenhouse with Two Roof Vents - Grey

A square greenhouse creates a flexible interior for gardeners who would like to arrange pots, propagation trays or separate growing areas within one enclosed structure. This 190 by 190 cm model uses an aluminium frame with 4 mm polycarbonate panels and reaches 200 cm high. The grey frame gives the structure a restrained look that works alongside paving, raised beds and other garden features.

Two adjustable roof vents are the main distinction from the narrower single-vent model. They provide openings for ventilation when warmth and moisture collect beneath the roof. A sliding entrance, pitched roof, gutters and included base complete the layout. The listing specifies a 190 by 190 cm foundation; always plan for the actual assembly footprint and access around the structure.

Design details

• Square walk-in floor plan
• aluminium frame
• translucent polycarbonate panels
• two adjustable roof vents
• sliding entrance
• pitched roof and rain gutters
• supplied foundation

Measurements and materials

• Overall: 190 W x 190 D x 200 H cm
• door: 62 W x 164 H cm
• vents: 61 W x 57 H cm
• base: 190 x 190 x 5 cm
• eave: 127 cm
• panel thickness: 4 mm

Placement and practical use

Install on a suitably level, anchored surface and follow the assembly instructions carefully. Consider exposure, wind, snow accumulation, drainage and any local installation requirements. Ventilate when temperatures rise and inspect roof connections and door tracks as part of routine maintenance.

The practical difference with this model is its 190 x 190 cm greenhouse with rigid panels and foundation. Think about where the door, vents and any external anchoring points will sit after the enclosure is assembled, rather than planning only around the dimensions of the roof. Put the most frequently tended pots where they are easiest to reach and allow room to inspect the covering and frame. This makes watering and seasonal adjustments easier without making claims about guaranteed growing results.

For planning, measure both the footprint on the ground and the usable path to the entrance. Pots, internal shelving and planting trays are not included unless they are specifically mentioned in the model details. Position containers so that door openings are not blocked and so water can be applied without causing continuous pooling around the base. Confirm that the installation site is permitted and that the supporting ground or wall can accommodate the supplied anchoring method.

A greenhouse cover or panel should be kept reasonably clean to maintain daylight through the enclosure. Periodically inspect fasteners, zippers, track systems, covering edges or vents as applicable. During unsuitable weather, follow the assembly instructions and local precautions. Product dimensions are approximate and should be used for fit planning rather than as a substitute for the supplied installation manual.

Before ordering: Review the measurements, quantity and material shown here against your available space and intended planting. Assembly is required unless clearly stated otherwise. Product photos may show plants, pots or decorative items for illustration; only the specifically described components are included.